Jiangyin Hengyi Engineering Machinery Co., Ltd

High quality is our obligation,great service is our mission!

Home > Exhibition > Content
Tips for using hydraulic breaker chisels
- May 19, 2017 -


When we need to use the chisel, how to use correct , so that the chisels can be used longer? The following little series to introduce you.

12 SOOSAN HANWOO DAEMO D&A MSB 钝型钎杆.JPG

blunt chisel

1, The use of the appropriate downward force can improve the efficiency of the hammer.
2, Should pay attention to the position of the hammer, appropriate adjustment, adjust to the impact of the shock when the rock can be crushed, so as to move to a new work location.
3, The crushing operation can not be continued in the same position, if in a position lasting work, will make the chisel temperature rise, reduce its hardness, so that the bottom of the chisel turnup, thereby reducing the efficiency of the operation.
4, The chisel shall not be used as a lever.
5, In the case of water installation prohibited in the water operation.
6, first of all, when the equipment does not leave the machine to drop the small arm, so that the equipment in a very safe state, in the state of operation of the machine to prohibit the departure of equipment.

27 JAB DNB TORPEDO KOMAC GENERAL BREAKER一字钎杆2.jpg

wedge chisel

Jiangyin Hengyi Engineering Machinery Co., Ltd
Mob: 86-15161619377
Tel: 86-510-86392508
Fax: 86-510-86392508
Add:No 19 Dongsheng Road,Chengdong Street,Jiangyin City,Jiangsu province,China
Email: Kristen-li@hotmail.com
Website: http://www.hengyichisel.com