Jiangyin Hengyi Engineering Machinery Co., Ltd

High quality is our obligation,great service is our mission!

Home > Exhibition > Content
Share some tips for using breaker hammers
- Jul 03, 2017 -


As users, we should understand that if the correct operation method is not mastered, no matter how good the performance of the product, it is difficult to achieve the desired effect. This is true when using a crushing hammer. If you do not follow the specific requirements to operate and use, then it is easy to cause breaker hammer chisel fracture and so on.

8 阿特拉斯 蒙特贝 KRUPP RAMMER INDECO 钝型钎杆.jpg

blunt chisel

So, what do we need to pay attention to when we operate and use the breaker hammer? If we can understand this problem, then we can not only get a better use of the effect, but also can be appropriate to extend the service life of the product, so that it achieves a higher utilization rate. Here we will share some tips for you to refer .

13 JAB DNB TORPEDO KOMAC GENERAL BREAKER钝型钎杆2.jpg

chisel

 The first tip, in the process of using breaker hammer, we might as well try to use its downward force rationally, as a result, the productivity of the product can be significantly improved;

 The second tip is that we can properly adjust the position of the hammer, and if it is found that the hammer does not achieve the desired effect in the course of the operation, then we should move to a new job location.

27 JAB DNB TORPEDO KOMAC GENERAL BREAKER一字钎杆1.jpg

wedge chisel


Jiangyin Hengyi Engineering Machinery Co., Ltd
Mob: 86-15161619377
Tel: 86-510-86392508
Fax: 86-510-86392508
Add:No 19 Dongsheng Road,Chengdong Street,Jiangyin,Jiangsu province,China
Email: Kristen-li@hotmail.com
Website: http://www.hengyichisel.com