Jiangyin Hengyi Engineering Machinery Co., Ltd

High quality is our obligation,great service is our mission!

Home > Exhibition > Content
Protection of HammerTip of Hydraulic breaker hammer blunt chisel
- Sep 15, 2017 -

Hydraulic breaker hammer blunt chisel after a period of time, due to the large work intensity and continuous strike for a long time, resulting in hydraulic hammer head shape changes. Although this is a normal performance, but still have to pay attention as much as possible, help to extend the Hydraulic breaker hammer blunt chisel life.

As the Hydraulic breaker hammer blunt chisel hardness is high, so the beginning of the use of time, it should be noted that can not use too much force, or directly in the hardness of the rock and other places to operate; should be used in advance smaller Of the striking force to warm up for some time, so that the drill rod to adapt to the working conditions and then normal operation.

In the operation of the Hydraulic breaker hammer blunt chisel, the same point in the same strike point as much as possible not to exceed 30s, if a long time to combat can not break the target object, you can try to change the hit position, making the Hydraulic breaker hammer blunt chisel Keep intact.

9 SOCOMEC SANDVIK JCB HAMMER ROTAIR CP-RX 钝型钎杆.jpg

Even if the Hydraulic breaker hammer blunt chisel is really deformed, but also only need to use their own grinding machine grinding sharp after you can continue to use; unless the situation is very serious, it is necessary to consider the replacement of hydraulic hammer hammer drill The After the end of the work, but also to its reasonable to save.

If you are long-term storage, it must ensure that it is intact, there will be broken when the timely repair, as far as possible before the storage of Hydraulic breaker hammer blunt chisel, the use of Hydraulic breaker hammer blunt chisel to save the environment, must ensure that dry; For maintenance, such as anti-rust treatment, etc .; In addition, as far as possible the use of vertical placement of the way to store Hydraulic breaker hammer blunt chisel, of course, can also be lying down.


Jiangyin Hengyi Engineering Machinery Co., Ltd
Mob: 86-15161619377 
Tel: 86-510-86392508
Fax: 86-510-86392508
Add:No 19 Dongsheng Road,Chengdong Street,Jiangyin,Jiangsu province,China
Email: Kristen-li@hotmail.com
Website: http://www.hengyichisel.com