Jiangyin Hengyi Engineering Machinery Co., Ltd

High quality is our obligation,great service is our mission!

Home > Exhibition > Content
Hydraulic Breaker Point Chisel equipment in use to pay attention to what
- Sep 11, 2017 -

【Overview】 First of all, on the hydraulic breaker point chisel and other related equipment in the use of time, to check the accumulator inflatable pressure is not normal; Next, we actually have to check the hydraulic equipment which rinse water Pressure and lubrication of air pressure is not correct; because the hydraulic breaker point chisel itself in the detection of the effect we should actually pay attention to look at it.

Then, when the equipment, including the hydraulic breaker point chisel, is being drilled, we should pay attention to the fact that the propeller should be placed directly on the rocking position so that the front end is directly on the rock , Be careful to manipulate the equipment to move forward, so that the drill bit to a certain extent, contact with rocks; openings, the equipment should first move forward, when the fiber rod in the rock when in place, and then manipulated to fully open The location can be a.

Hydraulic breaker point chisel if you can not successfully open the hole, on this point, we actually have to pay attention to the first should be manipulated hydraulic circuit breaker chisel device itself a retreat phenomenon, then we actually have to pay attention to should let The rock drill moves forward and then reopens the hole.

Including the hydraulic breaker point chisel, including the maintenance of hydraulic components in terms of its very large extent, in fact, it will be very clean conditions to go on, then, after the connection mechanism removed, we actually is to Pay attention to the plug with a clean tight plug.

Finally, in terms of hydraulic breaker point chisel if you want to store for a long time, it is in a very large extent, it should be careful to use a tight protective plug directly put all the plugs, tight Then, in fact, we should pay attention to is to be thoroughly cleaned, including the hydraulic breaker point chisel, including the entire machine equipment, followed by, that is, should pay attention to be to let go of the accumulator inside the gas.


Jiangyin Hengyi Engineering Machinery Co., Ltd
Mob: 86-15161619377 
Tel: 86-510-86392508
Fax: 86-510-86392508
Add:No 19 Dongsheng Road,Chengdong Street,Jiangyin,Jiangsu province,China
Email: Kristen-li@hotmail.com
Website: http://www.hengyichisel.com