Jiangyin Hengyi Engineering Machinery Co., Ltd

High quality is our obligation,great service is our mission!

Home > Exhibition > Content
How to Change Hydraulic Breaker Chisels Correctly
- Jun 26, 2017 -

The hydraulic breaker chisels need to be changed after a period time of using, today we are going to tell you how to change them correctly. Hope the below tips can be helpful.

13 JAB DNB TORPEDO KOMAC GENERAL BREAKER钝型钎杆2.jpg

blunt chisel

1.       Put the hammer on the ground, on two sleepers.

2.       Take the plug out near the stop pins

3.       Knock the stop pins out by iron sticks.

4.       Then take the tool pins out.

5.       Pull the old chisels out directly.

6.       Smear some butter on the top of the chisel, insert it into the bushes. Then put back the tool pins , stop pins and the plug. At last smear more butter.

38 CATERPILLAR MTB FRUKAWA NPK TOKU锻打钎杆3.jpg

hydraulic breaker chisel

Jiangyin Hengyi Engineering Machinery Co., Ltd
Mob: 86-15161619377
Tel: 86-510-86392508
Fax: 86-510-86392508
Add:No 19 Dongsheng Road,Chengdong Street,Jiangyin,Jiangsu province,China
Email: Kristen-li@hotmail.com
Website: http://www.hengyichisel.com